Saturday, November 12, 2011

Idea of the Day - Dog Bed for Golf Cart

Anyone who has bought a dog bed...especially one for a car...knows how costly this can be.  In the warmer weather, the dogs ride in the back basket of the cart.

But now the colder weather has arrived...and the new addition to the family doesn't have as much hair as DaisyDivot and tends to get chilly.  I came up with a simple solution (after trying to over complicate things and measure to build something).  There are several great things about this idea...
  • it's temporary
  • it's cheap
  • it's easy
  • it's washable/removable
So I took a piece of elastic I had laying around (you can buy this for about $1 if you don't happen to have any).  I didn't even sew it, I tied it around a laundry basket I bought for about $2, then I took it off and put a blanket into the basket (yes, it's a Burberry plaid...BUT I justify this because I got it at a thrift store for around 4 bucks).

I then tested it on Splash, the shivering short-hair dachshund


Then I simply sat it on the golf cart seat and ran a large hook through the side.  Alternatively you could use cable ties or anything handy...another great thing is that the basket has holes throughout!  So now I have an easily removable, cozy solution for winter rides in the golf cart!



One thing that I will say though, if you are looking for a great dog bed for your car, I can recommend this one from personal experience...



But as far as the golf cart goes, for less than $10 you can have those pups riding in style!

Holiday Idea of the Day, Crayon Wreaths

So I talked about making "toddler crayons" in a previous post.  I came up with a fun variation for the holidays.  In making crayons in a doughnut pan, the crayons are a little bit less stable so I came up with the idea to put two together.  Then, I had some pipe cleaners laying around (of course) so I made little bows for them.  You could use ribbon as well, that is just what was within arms reach at the time.



You can attach an ornament wire to these and they would make a great ornament gift (which can double as a crayon to doodle on wrapping paper when there is a lull on Christmas morning).

Thursday, November 10, 2011

Childproof your Fireplace

Childproofing can get EXPENSIVE!  Being a hardware store junkie, I often find that many items that are sold under the guise of "child safety" are repackaged basic items you can find in a different aisle at the hardware store.  Repackaged and, of course, repriced.

So...here's just one of my helpful childproofing tips in this arena.  Pipe insulation.  Yes, pipe insulation.  I am a big fan of the plumbing aisle, and I have found that lots of things can be childproofed with pipe insulation.

I first discovered this when I was mounting a swing on my porch...it had seen better days as far as the rope goes, and we all hate prickly rope...I think that was one of my first pet peeves as a child.  I cut some pipe insulation and put it around the rope and voila! 

But I digress...here are the basics...buy pipe insulation.  You can get the basic no-frills kind (around $2) or you can get it with peel and stick edges OR you can get pretty black pipe insulation.  Both are a little pricier but one point to remember is that the basic, no-frills pipe insulation has a split down it as well which can be pulled apart...so it's not that different.  For most of my childproofing, I use the basic, no-frills.  I splurged on the pretty black (for copper pipes) for my fireplace for aesthetic purposes.  Here is the result:




Pretty darn simple, right?  And about 1/3 the price of repackaged stuff!

Wednesday, November 9, 2011

Got Tutu's? Another PVC solution!

So there are lots of "Tu"-torials online about making no-sew tutu's (pardon the pun, I couldn't resist)...and, aside from a few that tell you to loop the elastic around your leg...very little about easier ways to work with your tutu in progress AND store your tutu's without worrying with pesky skirt hangers...that's most likely because they haven't found ME yet!

Unlike some of my other projects with PVC, this one is so simple that ANYONE could do it. 

Supplies needed:
  • 1 piece (or shorter if you can get it) of 3/4 inch PVC.  (PVC comes in 10 foot lengths.  This makes it sometimes awkward to fit into a car or SUV; however, the 3/4 inch is more flexible so that tends to be less of a problem).  Cost?  About $2.
  • A PVC cutter (in general, I use a chop saw because I am obsessed...but for the 3/4 inch, it's a cinch to cut by hand)  Home Depot sells an easy ratcheting PVC cutter by Brasscraft for about $14.  You can also use a hacksaw but that's kind of a pain.
  • 4 - 3/4 inch slip tees
  • 2 - 3/4 inch slip elbows
;Other than that, you shouldn't need too much instruction if you ever played with tinker toys...but if you do, let me know!




One tip, if you are making or displaying/storing tutus that are "toddler" size OR using hairbands then your cross pieces should be approximately 8 inches.  In general, take the normal width of your tutu waistband and subtract 2 inches for your cross pieces.

PVC and Me...The Beginning. Jewelry Holder.

Anyone who knows me knows I LOVE making things out of PVC.  PVC is an amazing medium to work with, it's like tinker toys for grown-ups.  Being up in the mountains and having taken a break from a fast-paced career life...I have to be busy.  I also found that having a child created new challenges in my 30-year old house. 

It all started with the re-organization of my jewelry.  I am one who thinks like MacGyver...and I had lots of random bracelets and necklaces that I wasn't wearing because they were shoved into a jewelry box or a plastic storage container.  I first thought that I would use a curtain rod...

This was somewhat functional but lacking the aesthetic effect that I wanted...I also had to remove it any time I wanted to get something off of it, and subsequently remove other things surrounding whatever I was trying to get to.

Then I had a day that would change my life.  I went to my local hardware store to look for solutions.  I happened upon the plumbing supply aisle and landed in a whole new world!  My very first project was a jewelry holder.  With the discovery of PVC connectors and spray paint for plastic...I was hooked.



Tuesday, November 8, 2011

Homemade Crayons, Recycle and Re-use!

When Vivian Grace was going through her "everything goes in the mouth" phase, I got pretty frustrated with the constant attempted ingestion of crayons.  The options in the store were limited and I figured (as I usually do) that there had to be a better way!  Guess what?  There was!



There are many different "formulas" for what I call, "Toddler Crayons".  There are small ones, big ones, multi-colored ones and single colored ones.  You can add glitter, you can add branding, and you can play around with lots of different ways.  Here are the basics:

Supplies needed:
  • Crayons.  NOT the washable kind.  If you have other children, chances are that you have a bucket of old crayons lying around...if you are in your first go around on the kiddie wagon, I suggest buying crayons whenever you find them cheap or on sale.  Again, may I stress, don't use washable crayons when doing this.
  • Muffin pans - For my examples, I used small muffin pans, regular muffin pans, mini-loaf pans and doughnut pans.
  • An oven
  • An exacto knife
  • A good movie or distraction while peeling crayons

First...peel the crayons.  If your child is older, this is a good activity for them to help with; however, if they are young or impatient I would pop in a good movie and take care of this with sharp objects.  I have found that, in general, crayons are a pain to peel.  I tried soaking them, etc. and it basically comes down to sharp things.  I will also speak from experience when I say BE CAREFUL!  If you have limited experience with exacto knives, go with something else!



I have found that, in order to keep from going over my work more than once, the deeper the better as far as slicing into the crayons.

Once your crayons are peeled, go ahead and preheat your oven to 275 (on most digital ovens you actually have to arrow down to get to that).



Here's the rub...how long you keep your crayon creations in the oven depends on the size of your vessel.  If you are using mini muffin pan (my preferred method), it's approximately 10 minutes.  Remember, there are lots of variables in ovens, a safe bet is to just set your timer to check on them every 5 minutes.

Your crayon creations are done when the tins are "chunk free".  Also, at least on my old beast of an oven, I have found that the outer tins melt quicker, so I tend to put more volume in them.

Once you remove the pan from the oven, let it cool completely and then I recommend throwing the whole pan into the freezer for about 5 minutes.  Once they are cool, they will pop out like magic.

Some variations:
  • since the cooking temp is pretty low, you can safely put a string into the wax once it has started to melt.
  • I thought the round ones would be really cute as wreaths for ornaments that can be used as crayons...and they really are, but they also break easier than the solid ones so you can either melt two of them together or just be somewhat careful.  Vivian doesn't really care if they are broken, even when they are broken in half, they still make great crayons.



Easy Chalkboard for Kids!


Materials Needed:
  • plywood, pressboard or other flat smooth wood
  • square wood to make frame
  • chalkboard paint
  • paint for frame
  • wood glue
  • wood screws
  • circular saw/table saw/jigsaw (any or all)
  • drill
  • astroturf (only for my "special" version)
  • hot glue gun
Total cost - on mine, less than $10.  In general, under $20

A few weeks ago I was at Tuesday Morning and I really thought I scored big when I found a little chalkboard/easel for $19.  Well, it's a great little find; however, as I tend to do, I thought I could make one that was bigger and better!



Turns out I was right...in my usual dig through the culled wood at Home Depot (if you don't know about this, you gotta check it out!) I found some tempered hardboard that had been torn/ripped.  Lucky me, it was FREE!  Now you can also buy it for a mere $14 at Home Depot...but it was nice to find it for free...

Here's the "unblemished" version available at Home Depot

Now the torn one I lucked out finding (since you have to cut it anyway, it didn't matter that it was damaged)
Now I am lucky enough to have friends with good tools, so I had someone cut it down to a square.  You can use a circular saw, table saw, jigsaw...or if you're really scrambling, a hand saw to cut it to whatever size you want.
After your board is cut, it's time for the paint.  You can buy a can of chalkboard paint for under $5 at your local hardware store.  Make sure that you apply several coats and that it dries well.




Also, the fine print on the can reminds you to "prime" the finished paint by covering it with chalk (rubbing with the side) and then erasing it.  I'm guessing that this prevents any of the first marks ending up being permanent (kind of like a screen saver for your chalkboard).

I also found (for 25 cents each) some square 1x1's in the culled lumber section which I used to make the frame.  I measured (and didn't do that great of a job this time) and then cut at 45 degree angles to make the frame.  For my next one, I will make the frame the same size as the board (maybe a little bigger) so that I can make this project simpler.  In my case, I made my frame fit around the board.  I have a chop saw (which makes my life wonderful), but you can use whatever you've got to make these angles.


Measured to make "frame" fit around the board...again, would do it differently next one.

Chop saw at 45 degree angle
Next, I used Elmer's wood glue to glue the edges together, I usually use screws but thought I would try something different this time.  I glued the edges and clamped them overnight.  Then it was time to paint.



After allowing the paint to dry, I put the pieces together.  As I stated earlier, I was a bit dismayed to find that making the frame to fit AROUND the board may have been a mistake, but I made it work out in the end.  Also, one of my 1x1's was a little skewed which left a gap anyway.



Now, if I had planned out my project/cutting differently I would be all done, using finishing nails to attach the board to the frame; however, I had to go a different route (which worked out just fine in the end but added a lot more time).  I decided to make kind of a "window box" for my chalkboard.  I first attached some braces to hold the bottom edges of the board (made with scrap wood and a miter saw/box)


Then I attached a 1x4 to the back side of the frame.  I made sure that the board actually was just a little bit wider than the frame.  Then I cut out two sides to my "window box" and another 1x4 that was the same size as the one on the back.  I grabbed some silver spray paint from the paint box and painted up the pieces.  I cut the sides at a 15 degree angle.


After this, I used a drill and wood screws to build the "window box".  Instead of adding a bottom, I thought I would give it a creative flair and line the box with astro turf (also something I happened to have lying around...lol)


To add the astroturf I just used a hot glue gun.

I then made an eraser out of little carpet sample squares and a ribbon loop.





Finished eraser, not too bad!
So my finished product ended up looking like this:

I've actually decided that I really like the "window" box on it...it is a good place to keep chalk (and anything else my toddler feels needs to go in there...)


And so ends the first version of make a chalkboard!