Okay, I must admit, this particular solution didn't work out for me, primarily because it will only work with necklaces that have clasps, BUT it was a stellar idea that ended up starting my addiction to PVC.
I was trying to come up with ideas to store all of my necklaces while maintaining counter space on my dresser, the solution? A curtain rod! Could have used a shower rod, but I happened to have an extra curtain rod so that's what I went with.
Now what I actually ended up going with has become a staple of my PVC creations, a jewelry organizer that will hold both bracelets and necklaces that hardly takes up any counter space!
Childproofing tips, household tips, ways to handle the oddest problems with the strangest materials and more!
Showing posts with label diy. Show all posts
Showing posts with label diy. Show all posts
Monday, October 28, 2013
Wednesday, January 30, 2013
"Greasing" Wood on Wood Sliding Doors
My house was built in the 70's, when built-ins of every shape and size were in. My basement has an entire wall of thick cabinets with basic, thick sliding doors on the bottom. Time and lack of use took their toll and I found I had to get a workout just opening them. I searched for a solution and learned that it is very simple!
Just the kind you can get at the Dollar Tree or anywhere else, cheaper the better. Just rub it on all of the contact edges and your doors will slide in no time.
Basic Bar Soap!
Just the kind you can get at the Dollar Tree or anywhere else, cheaper the better. Just rub it on all of the contact edges and your doors will slide in no time.
Labels:
bar soap,
built ins,
diy,
lubrication,
slide,
solution,
stuck,
unstick,
wooden doors
Monday, January 28, 2013
Toddler Friendly Sliding Doors!
So, some of you know that in a former life I owned a medical supply company. In digging through old inventory I found an overabundance of suction grab bars. I'm actually selling a bunch of them on Amazon (hint hint). Anyway, I have found them to be great for many things, put them in the tub, etc. but an unlikely solution came to me one day when I was watching Vivian try to get the sliding glass door to the porch open and yet, she could not reach the handle. I stuck one to the door right at her level, and she now has her own custom door slider!
Want some of your own? I've got the lowest price on Amazon for these things!
Want some of your own? I've got the lowest price on Amazon for these things!
The Sandbox Project
So about a year or two ago I was researching sandboxes....yes, my exciting life...I know! I was considering building one but found one on Amazon for a great price.
This isn't the exact one I bought but it's awfully close. Anyway, once it came, it was very easy to assemble, I had 2 issues with it that I wanted to add a bit of "MacGyver" to.
1. The bottom was open, which is fine for your typical suburban yard; but when you live in the mountains with snakes and other critters, it's not ideal.
2. The canopy was a lovely blue and white stripe. Unfortunately, the spot I needed to put it in was right in front of my house (as the back is a big slope with the risk of being reamed in the head by a golf ball. In addition, my little mountain community has rules and guidelines about color.
Then I bought one of those paint tarps with canvas on one side and plastic on the other...that worked for a while but I didn't feel it was exactly what I was going for.
Luckily I had bought some corrugated plastic (during a time I was trying to "MacGyver" a homemade slide to no avail). It sat outside for a while waiting for alternative inspiration and then one day...BAM...solution was right in front of my eyes!
I used tin snips to cut the piece in half and then nailed it right on top of the tarp. That gave me a rain proof roof that looked very nice.
Here is the final result:
This isn't the exact one I bought but it's awfully close. Anyway, once it came, it was very easy to assemble, I had 2 issues with it that I wanted to add a bit of "MacGyver" to.
1. The bottom was open, which is fine for your typical suburban yard; but when you live in the mountains with snakes and other critters, it's not ideal.
2. The canopy was a lovely blue and white stripe. Unfortunately, the spot I needed to put it in was right in front of my house (as the back is a big slope with the risk of being reamed in the head by a golf ball. In addition, my little mountain community has rules and guidelines about color.
Solutions!
Both solutions were quite simple. As far as the bottom went, I was able to staple landscape fabric to it, which would keep the critters out but also let it remain porous and not hold rain, etc. The top, well, that took a little trial and error. I first bought other fabric to put on it that would be more in line with the restrictive muted color guidelines of my community, but that wasn't the effect that I wanted.Then I bought one of those paint tarps with canvas on one side and plastic on the other...that worked for a while but I didn't feel it was exactly what I was going for.
Luckily I had bought some corrugated plastic (during a time I was trying to "MacGyver" a homemade slide to no avail). It sat outside for a while waiting for alternative inspiration and then one day...BAM...solution was right in front of my eyes!
I used tin snips to cut the piece in half and then nailed it right on top of the tarp. That gave me a rain proof roof that looked very nice.
Here is the final result:
Anyway, long story short, when putting a sandbox in that has an open bottom: landscape fabric on the bottom, corrugated plastic roofing on the top.
Easy Peasy!
Labels:
canopy,
corrugated roofing,
craftymountainmama,
diy,
landscape fabric,
outdoor,
play,
roof,
sandbox,
sandbox bottom,
shade,
toys
Wednesday, June 27, 2012
Cleaning the Kiddie Pool...SOLUTIONS!
Okay, quick breakdown of the MacGyver in the kiddie pool...first solution was a plastic hanger with screen from an old screen cut to size and wrapped around it, but I was still missing the little dirt.
Most people think that it is necessary to continually refill kiddie pools; but if you keep them clean and sprinkle a little spa shock in them every couple of days you can save water and $$!
Solution #2, Cheap badminton racket (got this one at a thrift store for $1), wrap it with old panty hose, and voila! A fantastic way to get the little dirt particles out of the kiddie pool!
Most people think that it is necessary to continually refill kiddie pools; but if you keep them clean and sprinkle a little spa shock in them every couple of days you can save water and $$!
Solution #2, Cheap badminton racket (got this one at a thrift store for $1), wrap it with old panty hose, and voila! A fantastic way to get the little dirt particles out of the kiddie pool!
Labels:
baby pool,
badminton racket,
cleaning outdoor pool,
diy,
how to clean plastic pool,
kiddie pool,
panty hose
Tuesday, March 20, 2012
Handy Tip for Worn Out Fridge Seal
So in addition to having a worn out seal on my fridge, I also happen to have a toddler...put the two together and I figured out a solution (perhaps a temporary one but saves me from actually figuring out how to order a new "seal"). For about $3, you can buy a "child proof" seal for your fridge. This helps keep it closed as well!
UPDATE: I had an appliance guy at my house to put in a new dishwasher and he thought that was an even better solution than replacing the seal (which, he couldn't find a problem with so odds are it wouldn't help!)
UPDATE: I had an appliance guy at my house to put in a new dishwasher and he thought that was an even better solution than replacing the seal (which, he couldn't find a problem with so odds are it wouldn't help!)
Monday, November 21, 2011
Dust Bag Solution for Miter Saw
Okay, here's the deal...they aren't expensive, and with Amazon it's easy to get a "legitimate" dust bag. But if you're in a pinch you can throw on a pair of old panty hose and secure it with a cable tie. If you don't feel that will do for you, go ahead and get one from Amazon! In the meantime, it's all about the panty hose.
Don't see what you're looking for? Click below for full search results from Amazon.
Replacement Dust Bags
Don't see what you're looking for? Click below for full search results from Amazon.
Labels:
amazon,
bosch,
diy,
dust bag,
easy solution to replace dust bag,
makita,
miter saw,
panty hose,
replacement dust bag,
rigid,
table saw
Sunday, November 20, 2011
Creative and functional Splat Mat
Have you noticed that so-called "splat mats" (the thingies that go under high chairs to protect your floor and allow for easy cleanup) are basically overpriced sheets of filmy plastic? So, when it came time to deal with this issue for me I came up with several solutions. First one was, of course, an actual splat mat that someone had given me. It was thin and not very aesthetically pleasing and when I tried to clean it with a cleaner that had some level of bleach in it, the Elmo design faded.
First solution:
Shower curtain.
This worked just fine and was easier to manipulate and clean; but it still wasn't what I was looking for.
Final solution:
Bathroom linoleum-type flooring.
I was in the process of re-doing my bathroom floors with this new product that you just cut and lay. It didn't have anything sticky on it, it just lay flat. I noticed it was relatively easy to cut with a utility knife (as I was doing the bathrooms). I had a good bit of excess laying around and one day I cut a square of it out and decided it would be my new splat mat. I was able to cut openings for my table legs AND I can scrub the heck out of it with anything I want! It stays put and it looks a heck of a lot nicer than anything else I tried!
You can go to your local hardware store and look for "no-glue" vinyl flooring and you may even be able to find a remnant!
First solution:
Shower curtain.
This worked just fine and was easier to manipulate and clean; but it still wasn't what I was looking for.
Final solution:
Bathroom linoleum-type flooring.
I was in the process of re-doing my bathroom floors with this new product that you just cut and lay. It didn't have anything sticky on it, it just lay flat. I noticed it was relatively easy to cut with a utility knife (as I was doing the bathrooms). I had a good bit of excess laying around and one day I cut a square of it out and decided it would be my new splat mat. I was able to cut openings for my table legs AND I can scrub the heck out of it with anything I want! It stays put and it looks a heck of a lot nicer than anything else I tried!
You can go to your local hardware store and look for "no-glue" vinyl flooring and you may even be able to find a remnant!
Labels:
baby,
bathroom flooring,
bleach,
clean,
creative,
diy,
feeding,
highchair,
infant,
no-glue flooring,
shower curtain,
splat mat,
toddler
Thursday, November 17, 2011
PVC + 5 Gallon Buckets = Great Toy Storage!
Here's a quick and easy PVC solution and a fun way to store toys or anything else...
Vivian LOVES putting things away these days...I can only hope that habit will last! So I thought of making a small (but expandable) "storage shelf" that she can reach and where she can put balls and various other toys. This project took less than an hour.
Materials needed:
When adding the buckets, put the buckets face-down and bang the pvc onto them for a snug fit.
You could also paint the whole project now that there is awesome spray paint that bonds to plastic!
Vivian LOVES putting things away these days...I can only hope that habit will last! So I thought of making a small (but expandable) "storage shelf" that she can reach and where she can put balls and various other toys. This project took less than an hour.
Materials needed:
- 1" schedule 40 PVC pipe. They sell this in 10' increments which is just about exactly what you need for this project.
- 4 x 1" PVC slip tees
- 6 x 1" PVC slip elbows
- 1 x 1" PVC 4-way cross connector
- 2 x 1" PVC end caps
- PVC Pipe cutter (I use a table/chop saw because I cut a LOT of PVC)
- 3 x 5 gallon buckets (can get at hardware or superstore in paint section)
- Cut 10 pieces measuring 10 inches
- Cut 2 pieces measuring 4 inches
- Cut 3 pieces measuring 2 inches
- Assemble as shown
When adding the buckets, put the buckets face-down and bang the pvc onto them for a snug fit.
You could also paint the whole project now that there is awesome spray paint that bonds to plastic!
Labels:
5 gallon,
balls,
child,
craft,
diy,
easy,
garage,
home improvement,
kid,
paint buckets,
plumbing supplies,
project,
pvc,
shelf,
simple,
storage,
toddler,
toys
Wednesday, November 16, 2011
Holiday Decor of the Day - PVC Wreath
Update...after mandatory supply run today (was out of PVC glue and was trying to "wing" it with some random caulky glue which was far from successful. Had a chance to cut up some more PVC and dig for remnants from previous projects. Partnered with dreary weather and tornado warnings all day, it's been a good day for crafting around. As before, Instructions and information coming soon; but one thing I will say is that if you don't have a decent table saw or chop saw (or know someone who does), then this project might be too time consuming; but the finished project is just stunning and I can't wait to improve on it even more!
It was almost fun and therapeutic once I had the right adhesives in place. I thought about figuring out a way to create some kind fancy algorithm so that I could create a mathematically generated pattern and then I realized that I was, as I tend to do, overthinking it when I could just do it the simple way...glue one pipe...then eyeball it, and then the next.
I used a piece of plywood to serve as my staging area ad I realized that a small metal spatula is super handy for separating the pvc...one of those lucky moments when I thought the entire project was glued to the plywood until I tried the spatula (thinking that PVC glue pretty much just sticks PVC).
So there will be more detail coming soon...today's lesson learned, use the right tool for the right job, especially when it comes to glue, it makes your project so much easier!
It was almost fun and therapeutic once I had the right adhesives in place. I thought about figuring out a way to create some kind fancy algorithm so that I could create a mathematically generated pattern and then I realized that I was, as I tend to do, overthinking it when I could just do it the simple way...glue one pipe...then eyeball it, and then the next.
I used a piece of plywood to serve as my staging area ad I realized that a small metal spatula is super handy for separating the pvc...one of those lucky moments when I thought the entire project was glued to the plywood until I tried the spatula (thinking that PVC glue pretty much just sticks PVC).
So there will be more detail coming soon...today's lesson learned, use the right tool for the right job, especially when it comes to glue, it makes your project so much easier!
![]() | ||
| This was Round 1 with the "caulk"...not quite the ticket |
Labels:
christmas,
decorations,
diy,
funky,
holiday craft ideas,
holiday crafts,
pipes,
plumbing supplies,
PVC wreath,
unique,
wreath
Monday, November 14, 2011
Holiday Idea of the Day – DIY Snow Globes
Snow Globes are a fantastic gift…when I was a child, my very first "collection" was of snow globes. In recent days, I have seen DIY snow globes at the drug store where you can insert your own pictures and, of course, I thought…there has to be a better way! So after much experimenting and adjustment, here is the finished product:
Materials List:
- Glass jar (baby food jars are GREAT). My community has a recycle center and I find a variety of glass jars there.
- Distilled Water
- Glycerin (you can find this at your local drug store in a very random spot, usually on the bottom shelf near the lotion)
- Spray Paint
- Sandpaper
- PVC pipe (optional)
- Glitter
- Clear shipping tape
- Laminating supplies (optional, if you don't have this see above item)
- Epoxy glue
You can go a couple of different directions with this project…a fun variation is to use photos. This is where laminating supplies come in. I happen to have a laminator but not everyone does. I bought mine years ago and I must say, I'm amazed at how often it comes in handy. These days you can purchase one for as little as $30 and let me say, I highly recommend having one!
For this project I used a combination of snow and glitter. To make snow, I used PVC shavings. I happen to make a lot of things out of PVC so this was not hard for me to obtain. I have seen where people have used a cheese grater to make PVC snow…I tried this (with a cheap grater from Dollar General or somewhere similar) and didn't have much luck. If you have a piece of PVC pipe and a saw, I would use the saw and, believe me, you'll get shavings from just cutting it. My porch used to look like a snow globe until I figured out how to replace a missing "shaver catcher" on my chop saw.
So here goes:
- Gather your supplies together.
- Clean your jars and remove any glue/labels. Best way to accomplish this is by soaking them. I tried spraying them with one of those goo remover sprays and soaking worked better.
- Paint your lids with whatever color you want.
- If you are putting items in your snow globe and don't want them to be floating around…sand the inside of your lid until it is rough and textured.
- If you are using photos in your snow globe, measure the height and diameter of your jar and make a collage or use a single photo that will fit. On the photos, I recommend making a circle out of them (like a toilet paper roll). Laminate your photo by either using a laminator or shipping tape. Make sure you get a tight seal. I laminated my collage and immediately rolled it into a toilet paper roll to make sure it didn't get too stiff and I would be able to maintain the shape of it. I used shipping tape to seal the ends together after the round shape was formed.
- Using an epoxy/waterproof glue, glue any items you are going to put into the globe onto your sanded lid.
- Fill your jar almost all the way with distilled water.
- Add glitter and/or snow.
- Add a few drops of glycerin.
- Screw the lid on tightly…however, give it a trial run first to figure out if you need to add more snow, glitter or glycerin. The glycerin is what makes everything drift around rather than floating to the top. Do this FIRST and then screw the lid on really tight.
- Enjoy!
Saturday, November 12, 2011
Idea of the Day - Dog Bed for Golf Cart
Anyone who has bought a dog bed...especially one for a car...knows how costly this can be. In the warmer weather, the dogs ride in the back basket of the cart.
But now the colder weather has arrived...and the new addition to the family doesn't have as much hair as DaisyDivot and tends to get chilly. I came up with a simple solution (after trying to over complicate things and measure to build something). There are several great things about this idea...
I then tested it on Splash, the shivering short-hair dachshund
Then I simply sat it on the golf cart seat and ran a large hook through the side. Alternatively you could use cable ties or anything handy...another great thing is that the basket has holes throughout! So now I have an easily removable, cozy solution for winter rides in the golf cart!
One thing that I will say though, if you are looking for a great dog bed for your car, I can recommend this one from personal experience...
But as far as the golf cart goes, for less than $10 you can have those pups riding in style!
But now the colder weather has arrived...and the new addition to the family doesn't have as much hair as DaisyDivot and tends to get chilly. I came up with a simple solution (after trying to over complicate things and measure to build something). There are several great things about this idea...
- it's temporary
- it's cheap
- it's easy
- it's washable/removable
I then tested it on Splash, the shivering short-hair dachshund
Then I simply sat it on the golf cart seat and ran a large hook through the side. Alternatively you could use cable ties or anything handy...another great thing is that the basket has holes throughout! So now I have an easily removable, cozy solution for winter rides in the golf cart!
One thing that I will say though, if you are looking for a great dog bed for your car, I can recommend this one from personal experience...
But as far as the golf cart goes, for less than $10 you can have those pups riding in style!
Location:
Bent Tree Golf Club
Thursday, November 10, 2011
Childproof your Fireplace
Childproofing can get EXPENSIVE! Being a hardware store junkie, I often find that many items that are sold under the guise of "child safety" are repackaged basic items you can find in a different aisle at the hardware store. Repackaged and, of course, repriced.
So...here's just one of my helpful childproofing tips in this arena. Pipe insulation. Yes, pipe insulation. I am a big fan of the plumbing aisle, and I have found that lots of things can be childproofed with pipe insulation.
I first discovered this when I was mounting a swing on my porch...it had seen better days as far as the rope goes, and we all hate prickly rope...I think that was one of my first pet peeves as a child. I cut some pipe insulation and put it around the rope and voila!
But I digress...here are the basics...buy pipe insulation. You can get the basic no-frills kind (around $2) or you can get it with peel and stick edges OR you can get pretty black pipe insulation. Both are a little pricier but one point to remember is that the basic, no-frills pipe insulation has a split down it as well which can be pulled apart...so it's not that different. For most of my childproofing, I use the basic, no-frills. I splurged on the pretty black (for copper pipes) for my fireplace for aesthetic purposes. Here is the result:
Pretty darn simple, right? And about 1/3 the price of repackaged stuff!
So...here's just one of my helpful childproofing tips in this arena. Pipe insulation. Yes, pipe insulation. I am a big fan of the plumbing aisle, and I have found that lots of things can be childproofed with pipe insulation.
I first discovered this when I was mounting a swing on my porch...it had seen better days as far as the rope goes, and we all hate prickly rope...I think that was one of my first pet peeves as a child. I cut some pipe insulation and put it around the rope and voila!
But I digress...here are the basics...buy pipe insulation. You can get the basic no-frills kind (around $2) or you can get it with peel and stick edges OR you can get pretty black pipe insulation. Both are a little pricier but one point to remember is that the basic, no-frills pipe insulation has a split down it as well which can be pulled apart...so it's not that different. For most of my childproofing, I use the basic, no-frills. I splurged on the pretty black (for copper pipes) for my fireplace for aesthetic purposes. Here is the result:
Pretty darn simple, right? And about 1/3 the price of repackaged stuff!
Labels:
babyproof,
childproofing,
crawling,
diy,
easy,
fireplace,
hardware store,
pipe insulation,
simple,
toddler,
walking
Wednesday, November 9, 2011
Got Tutu's? Another PVC solution!
So there are lots of "Tu"-torials online about making no-sew tutu's (pardon the pun, I couldn't resist)...and, aside from a few that tell you to loop the elastic around your leg...very little about easier ways to work with your tutu in progress AND store your tutu's without worrying with pesky skirt hangers...that's most likely because they haven't found ME yet!
Unlike some of my other projects with PVC, this one is so simple that ANYONE could do it.
Supplies needed:
One tip, if you are making or displaying/storing tutus that are "toddler" size OR using hairbands then your cross pieces should be approximately 8 inches. In general, take the normal width of your tutu waistband and subtract 2 inches for your cross pieces.
Unlike some of my other projects with PVC, this one is so simple that ANYONE could do it.
Supplies needed:
- 1 piece (or shorter if you can get it) of 3/4 inch PVC. (PVC comes in 10 foot lengths. This makes it sometimes awkward to fit into a car or SUV; however, the 3/4 inch is more flexible so that tends to be less of a problem). Cost? About $2.
- A PVC cutter (in general, I use a chop saw because I am obsessed...but for the 3/4 inch, it's a cinch to cut by hand) Home Depot sells an easy ratcheting PVC cutter by Brasscraft for about $14. You can also use a hacksaw but that's kind of a pain.
- 4 - 3/4 inch slip tees
- 2 - 3/4 inch slip elbows
One tip, if you are making or displaying/storing tutus that are "toddler" size OR using hairbands then your cross pieces should be approximately 8 inches. In general, take the normal width of your tutu waistband and subtract 2 inches for your cross pieces.
PVC and Me...The Beginning. Jewelry Holder.
Anyone who knows me knows I LOVE making things out of PVC. PVC is an amazing medium to work with, it's like tinker toys for grown-ups. Being up in the mountains and having taken a break from a fast-paced career life...I have to be busy. I also found that having a child created new challenges in my 30-year old house.
It all started with the re-organization of my jewelry. I am one who thinks like MacGyver...and I had lots of random bracelets and necklaces that I wasn't wearing because they were shoved into a jewelry box or a plastic storage container. I first thought that I would use a curtain rod...
This was somewhat functional but lacking the aesthetic effect that I wanted...I also had to remove it any time I wanted to get something off of it, and subsequently remove other things surrounding whatever I was trying to get to.
Then I had a day that would change my life. I went to my local hardware store to look for solutions. I happened upon the plumbing supply aisle and landed in a whole new world! My very first project was a jewelry holder. With the discovery of PVC connectors and spray paint for plastic...I was hooked.
It all started with the re-organization of my jewelry. I am one who thinks like MacGyver...and I had lots of random bracelets and necklaces that I wasn't wearing because they were shoved into a jewelry box or a plastic storage container. I first thought that I would use a curtain rod...
This was somewhat functional but lacking the aesthetic effect that I wanted...I also had to remove it any time I wanted to get something off of it, and subsequently remove other things surrounding whatever I was trying to get to.
Then I had a day that would change my life. I went to my local hardware store to look for solutions. I happened upon the plumbing supply aisle and landed in a whole new world! My very first project was a jewelry holder. With the discovery of PVC connectors and spray paint for plastic...I was hooked.
Labels:
bracelet,
connectors,
crafts,
display,
diy,
hardware,
home improvement,
jewelry holder,
krylon,
macgyver,
necklace,
paint,
plumbing supplies,
project,
pvc,
rack,
shelf,
storage
Tuesday, November 8, 2011
Easy Chalkboard for Kids!
Materials Needed:
- plywood, pressboard or other flat smooth wood
- square wood to make frame
- chalkboard paint
- paint for frame
- wood glue
- wood screws
- circular saw/table saw/jigsaw (any or all)
- drill
- astroturf (only for my "special" version)
- hot glue gun
A few weeks ago I was at Tuesday Morning and I really thought I scored big when I found a little chalkboard/easel for $19. Well, it's a great little find; however, as I tend to do, I thought I could make one that was bigger and better!
Turns out I was right...in my usual dig through the culled wood at Home Depot (if you don't know about this, you gotta check it out!) I found some tempered hardboard that had been torn/ripped. Lucky me, it was FREE! Now you can also buy it for a mere $14 at Home Depot...but it was nice to find it for free...
| Here's the "unblemished" version available at Home Depot |
Now I am lucky enough to have friends with good tools, so I had someone cut it down to a square. You can use a circular saw, table saw, jigsaw...or if you're really scrambling, a hand saw to cut it to whatever size you want.
After your board is cut, it's time for the paint. You can buy a can of chalkboard paint for under $5 at your local hardware store. Make sure that you apply several coats and that it dries well.
Also, the fine print on the can reminds you to "prime" the finished paint by covering it with chalk (rubbing with the side) and then erasing it. I'm guessing that this prevents any of the first marks ending up being permanent (kind of like a screen saver for your chalkboard).
I also found (for 25 cents each) some square 1x1's in the culled lumber section which I used to make the frame. I measured (and didn't do that great of a job this time) and then cut at 45 degree angles to make the frame. For my next one, I will make the frame the same size as the board (maybe a little bigger) so that I can make this project simpler. In my case, I made my frame fit around the board. I have a chop saw (which makes my life wonderful), but you can use whatever you've got to make these angles.
| Measured to make "frame" fit around the board...again, would do it differently next one. |
| Chop saw at 45 degree angle |
Next, I used Elmer's wood glue to glue the edges together, I usually use screws but thought I would try something different this time. I glued the edges and clamped them overnight. Then it was time to paint.
After allowing the paint to dry, I put the pieces together. As I stated earlier, I was a bit dismayed to find that making the frame to fit AROUND the board may have been a mistake, but I made it work out in the end. Also, one of my 1x1's was a little skewed which left a gap anyway.
Now, if I had planned out my project/cutting differently I would be all done, using finishing nails to attach the board to the frame; however, I had to go a different route (which worked out just fine in the end but added a lot more time). I decided to make kind of a "window box" for my chalkboard. I first attached some braces to hold the bottom edges of the board (made with scrap wood and a miter saw/box)
Then I attached a 1x4 to the back side of the frame. I made sure that the board actually was just a little bit wider than the frame. Then I cut out two sides to my "window box" and another 1x4 that was the same size as the one on the back. I grabbed some silver spray paint from the paint box and painted up the pieces. I cut the sides at a 15 degree angle.
After this, I used a drill and wood screws to build the "window box". Instead of adding a bottom, I thought I would give it a creative flair and line the box with astro turf (also something I happened to have lying around...lol)
To add the astroturf I just used a hot glue gun.
I then made an eraser out of little carpet sample squares and a ribbon loop.
| Finished eraser, not too bad! |
So my finished product ended up looking like this:
I've actually decided that I really like the "window" box on it...it is a good place to keep chalk (and anything else my toddler feels needs to go in there...)
And so ends the first version of make a chalkboard!
Labels:
activity,
affordable,
chalk,
chalkboard,
christmas,
craft,
diy,
easy,
eraser,
frame,
fun,
gift,
paint,
present,
project,
toddler,
toy,
wood screws
Subscribe to:
Posts (Atom)

Find it at Home Depot









